Rear Antilock Bulb (Yellow) RABS Self-Check

The yellow ABS warning indicator is used to indicate a malfunction and a deactivation of the RABS II. To check this indicator, first follow the procedure for Red Brake Warning Indicator Self Check, and allow the key to spring back from the "START" position to the "RUN" position. The yellow ABS warning indicator should perform a self check by glowing for approximately two seconds and then turning off. If it turns back on and does not flash, then a system concern has been detected. Refer to procedures for obtaining diagnostic trouble codes. If it fails to glow, go to the Symptom Chart. [1][2][3]Diagnostic Trouble Code Descriptions