Verification Test VER-1A - ABS

PROCEDURE
1. Connect all previously disconnected components and connectors.
2. With the DRB, erase all diagnostic trouble codes.
3. Turn the ignition key on. With the DRB, read trouble codes. If any trouble codes are present, repeat TEST 1A.Test 1A - Checking For Diagnostic Trouble Codes
4. If there are no codes present upon key up, road test the vehicle for at least 5 minutes. Perform several antilock braking stops and traction control starts if equipped.

CAUTION: Ensure braking capability is available before road testing vehicle

NOTE: When the DRB is in ABS diagnostics, the ABS system is disabled.

5. Again, with the DRB, read trouble codes. If any codes are present, repeat TEST 1A.
6. If there are no trouble codes present and the customer's complaint can no longer be duplicated, the repair is complete.