Light Does Not Illuminate
Battery Connections:
System Operation and Code Output
This diagnostic trouble code is output when an open circuit occurs for a continuous period of 5 seconds while the SRS-ECU is monitoring the SRS warning light and the light is OFF (transistor OFF). However, if this code is output due to an open circuit, if the vehicle condition returns to normal, this diagnostic trouble code will be automatically erased, and the SRS warning light will switch off.
Probable Cause
- Malfunction of harnesses or connectors
- Burned out bulb
- Malfunction of SRS-ECU
- Malfunction of combination meter
Diagnostic Chart:
Testing - Corrective Action
Caution: Turn the ignition key to the "LOCK" position, disconnect the negative battery cable and tape the terminal. Wait at least 60 seconds after disconnecting the battery cable before doing any further work. (Refer to Service Precautions)