Power Seat

The power seat system is protected by a 20 Amp circuit breaker located in cavity 23 of the junction block. This circuit breaker is HOT at all times. Circuit A3 is the power supply for the circuit breaker.

The A3 circuit originates in the Power Distribution Center (PDC) and is protected by a 30 Amp fuse located in cavity H. This circuit is also the feed for the Daytime Running Lamps, Headlamp Relay, and Power Door Locks.

Circuit F35 is the feed for the switches and the seat motors from the circuit breaker. A BUS bar internal to the switches feeds all the contacts. Grounding for the seats is provided on circuit Z1, which terminates at the instrument panel left side cowl.