Left Rear Sensor Circuit Failure

When monitored: Continuously.

Set condition: The CAB continuously monitors the wheel speed sensor circuits. The CAB sends a small signal (trigger) pulse through the sensor circuits. If the CAB does not receive the proper signal back, this code is set.

Note: All wheel speed sensors have a resistance of 800 to 1400 ohms.

Possible causes:

> Wheel speed sensor
> LR wheel speed sensor (-) circuit open
> LR wheel speed sensor (+) circuit open
> Left rear 8-way connector disconnected
> LR wheel speed sensor (-) circuit shorted to ground
> LR wheel speed sensor (+) circuit shorted to ground
> Wheel speed sensor 2-way connector disconnected
> LR wheel speed sensor (-) circuit shorted to B(+)
> LR wheel speed sensor (+) circuit shorted to B(+)