Airbag System

1. Turn the ignition key to the "LOCK" position, disconnect the negative battery cable and tape the terminal.

Caution:Wait at least 60 seconds after disconnecting the battery cable before doing any further work. Air Bags Precautions

2. Remove the floor console assembly.





3. Place a flat-tipped screwdriver against the lock spring at the lock lever notch and push the spring toward the unit.

Caution: Do not use excessive force to raise the lock lever (green).

The capacitor inside the SDU is probably defective, so replace the SDU.

However, code No.32 could also be a result of a short in the front impact sensor, so inspection of the front impact sensor system should also be carried out. 1, 2 and 3 Digit Codes
1, 2 and 3 Digit Codes
1, 2 and 3 Digit Codes