Mechanical Specifications

GEAR RATIOS:
First Gear 2.84
Second Gear 1.57
Direct Gear 1.00
Overdrive Gear 0.69
Reverse Gear 2.21
Overall Top Gear Ratio 2.52

TAPERED ROLLER BEARING SETTINGS:
Differential Assembly 7 - 30 inch lbs. Drag Torque
Output Sprocket Assembly 1 - 8 inch lbs. Drag Torque
Transfer Sprocket Assembly 1 - 8 inch lbs. Drag Torque
Overall Drag At Output Hub 10 - 60 inch lbs. Drag Torque

SPROCKET SET VARIANCE:
Height Variance +/-0.457 mm (+/-0.018 inch)

END PLAY:
Transmission 0.127 - 0.635 mm (0.005 - 0.025 inch)

TIGHTENING TORQUE:
Adjacent Lock Bracket 5 Nm (45 inch lbs.)
End Cover To Case 28 Nm (250 inch lbs.)
Low/Reverse Clutch Retainer To Case 5 Nm (45 inch lbs.)
Main Sump Vent Screw 5 Nm (45 inch lbs.)
Main Sump Vent 11 Nm (100 inch lbs.)
Manual Lever To Valve Body 5 Nm (45 inch lbs.)
Output Shaft Nut 271 Nm (200 ft. lbs.)
Park Sprag Retainer Screw 5 Nm (45 inch lbs.)
Pressure Check Plug 6 Nm (53 inch lbs.)
Reaction Shaft Assembly Bolt 28 Nm (250 inch lbs.)
Snubber Screws 5 Nm (45 inch lbs.)
Transfer Shaft Stake Nuts 271 Nm (200 ft. lbs.)