Shift Linkage: Adjustments
Column Shift1. Remove upper steering column shroud, then rotate cable adjuster into unlock position.
2. Ensure transaxle shift lever (at transaxle) is in the Park position.
3. Tilt steering column to full up position, then place shifter in Park position with key removed.
4. Adjust by rotating adjuster to lock position.
5. Install upper steering column shroud.
6. Check shifter for proper operation. Vehicle should start in Park or Neutral only.
Floor Shift
1. Remove shifter handle and console bezel, then loosen nut on shifter cable adjuster.
2. Set shift lever assembly in Park (most rearward) position at transaxle.
3. Place shifter in Park position, then place ignition in lock with key removed.
4. Tighten adjuster nut at shifter.
5. Install console bezel and shifter handle.
6. Check shifter for proper operation. Vehicle should start in Park or Neutral only.