Clutch Pedal Assembly: Service and Repair

Fig. 6 Removing Clutch Pedal:

Remove clutch pedal in numbered sequence, noting the following:
1. Remove lap cooler duct, shower duct, and knee protector. Refer to the BODY ELECTRICAL SAFETY AND ENTERTAINMENT/INSTRUMENT PANELS AND CLUSTERS/COMPONENT R&R PROCEDURES/DASH PANEL.
2. Remove steering column assembly, refer to Steering and Suspension/Steering/Steering Column/Service and Repair.
3. Remove relay box.
4. Apply lubricant to the clutch pedal bushings, clevis pin and washer and, on turbo models, bushing No. 8.
5. Reverse procedure to install.