Front
Fig. 5 Removing Strut Assembly:
REMOVAL
Remove strut assembly in numbered sequence, noting the following:
1. Do not pry brake hose and line away from strut.
Fig. 6 Disassembling Strut:
Fig. 7 Compressing Spring:
Fig. 8 Installing Dust Cover:
DISASSEMBLY & ASSEMBLY
Disassemble strut in numbered sequence, noting the following:
1. Compress coil spring, then remove locknut.
2. Join dust cover and bump rubber.
3. Line up holes in spring upper and lower seats.
Fig. 9 Insulator Position:
INSTALLATION
Reverse removal procedure to install, noting the following:
1. Install strut assembly insulator as shown.