System Specifications

TIGHTENING TORQUE SPECIFICATIONS:

Accelerator cable adjustment bolts 3-4 lb-ft (4-6 Nm)
[1][2]Air bypass valve 11-16 lb-ft (15-22 Nm)
Air hoses (hose clamps) 3 lb-ft (4 Nm)
Air pipe mounting bolts 9-11 lb-ft (12-15 Nm)
Drain plug 11-14 lb-ft (15-20 Nm)
Fuel pressure regulator installation bolts 6-7 lb-ft (8-10 Nm)
Fuel rail installation bolts 7-9 lb-ft (10-13 Nm)
Ground plate mounting screws 1.5-2 lb-ft (2-3 Nm)
High pressure hose to fuel filter 18-25 lb-ft (25-35 Nm)
High pressure hose to fuel rail 3-4 lb-ft (4-6 Nm)
High pressure hose to fuel pump 22-29 lb-ft (30-40 Nm)
Intercooler to body 9-11 lb-ft (12-15 Nm)
Main pipe to fuel filter 22-29 lb-ft (30-40 Nm)
Main pipe to high pressure hose (2WD) 18-25 lb-ft (25-35 Nm)
Main pipe to high pressure hose (4WD) 22-29 lb-ft (30-40 Nm)
Oil pipe to engine 10-14 lb-ft (14-19 Nm)
Oil pipe to turbocharger 20-25 lb-ft (28-34 Nm)
Oil return pipe 6-7 lb-ft (8-10 Nm)
Throttle body stay mounting nuts 11-16 lb-ft (15-22 Nm)
Throttle body to surge tank bolts 11-16 lb-ft (15-22 Nm)
Wastegate actuator 7-9 lb-ft (10-13 Nm)
Water pipe "A" mounting bolt 7-9 lb-ft (10-12 Nm)
Water pipe A to turbocharger 25-36 lb-ft (35-50 Nm)
Water pipe B to turbocharger 25-36 lb-ft (35-50 Nm)
Water pipe B to water inlet pipe 29-36 lb-ft (40-50 Nm)