Single Fan

5.7/6.4L SINGLE FAN






NOTE: If replacing the fan blades. The dual fan blades can be replaced separately from the motor. Single motor fan blades are balanced to the motor and must be replaced as a fan/motor assembly.

1. Disconnect negative battery cable.
2. Remove the air filter housing assembly Air Cleaner Body - Removal
3. Disconnect the cooling fan electrical connector (1).
4. Remove the upper cooling fan mounting bolts (3).






NOTE: The lower radiator support does not need to be removed. The bolts can be loosened so that the support can be positioned forward enough for the cooling fan to be removed from the bottom of the vehicle.

5. Raise vehicle.
6. If equipped, remove the lower engine belly pan.
7. Loosen the lower radiator core support bolts (1).





8. Remove the radiator cooling fan assembly (1) from the radiator by pushing up and away from the radiator mounts.
9. While moving the lower core support forward, slowly lower the left side of the cooling fan assembly from the bottom of the vehicle.
10. Remove the cooling fan assembly from the vehicle taking care not to damage the fins on the radiator.