Rear Door Glass - Installation

INSTALLATION





1. Insert the rear door glass (1) into the carrier plate cavity, lift the glass and tape the glass to the door header.
2. Install the rear door carrier plate, Rear Door Carrier Plate - Installation
3. Install the outside door handle.
4. With the help of an assistant holding the glass, remove the tape securing the glass, lower and align the glass with the regulator tab.
5. Engage the window regulator tab into the glass.
6. Apply a clear adhesive patch or equivalent to the front window regulator access hole.
7. Close the latch access panel.
8. Reinstall the inner belt weatherstrip onto the rear door.
9. Reinstall the trim panel onto the inside of the rear door, Rear Door Trim Panel - Installation.