Front Door Glass - Removal

REMOVAL





1. Remove the trim panel from the inside of the front door, Front Door Trim Panel - Removal.
2. Remove the inner belt weatherstrip from the front door.
3. Open the latch access panel located on the carrier plate near the lock rod assembly.
4. Remove the clear adhesive patch covering the front window regulator access hole located just behind the electronic mirror module.
5. Temporarily install the window switch pod, reconnect the negative battery cable and lower the window until the white regulator tabs are visible in both access holes.
6. With the help of an assistant holding the glass, release the front and rear window regulator tabs and lift the window up and out.