Side Marker Lamp Bulb - Removal

BULB





1. Disconnect and isolate the battery negative cable.
2. Remove the rear side marker lamp lens and housing (1) from the rear fascia (2). Side Marker Lamp - Removal.
3. Pull the lamp out from the rear fascia far enough to access the bulb socket (3) on the back of the lamp housing.
4. Firmly grasp the bulb socket on the back of the lamp housing and rotate it counterclockwise about 30 degrees to unlock it.
5. Pull the socket and bulb straight out from the keyed opening in the housing.
6. Pull the base of the bulb straight out of the socket.