Fog Lamp - Installation

LAMP





1. Position the front fog lamp mounting bracket to the fog lamp seat on the back of the lower front fascia (2).
2. Install and tighten the three screws (1) that secure the mounting bracket to the fascia. Tighten the screws securely.
3. Reconnect the headlamp and dash wire harness connector (3) to the front fog lamp bulb (4) connector receptacle.
4. Reinstall the front belly pan to the underbody. Belly Pan - Installation.
5. Reconnect the battery negative cable.
6. Confirm proper fog lamp alignment. Front Lamp Alignment.