Instrument Panel Duct - Installation

INSTALLATION

NOTE: Take the proper precautions to protect the face of the instrument panel from cosmetic damage.

LEFT SIDE





1. Position the left side instrument panel duct (2) to the instrument panel support (6).
2. Install the two screws (1 and 3) that secure the left side instrument panel duct to the instrument panel support. Tighten the screws to 2.2 Nm (20 in. lbs.).
3. Install the push-pin fastener (4) that secures the demister duct (5) to the left side instrument panel duct.
4. Install the instrument panel cover Instrument Panel Cover - Installation.
5. Install the instrument panel Instrument Panel - Installation.

RIGHT SIDE





1. Position the right side instrument panel duct (1) to the instrument panel support (6).
2. Install the two screws (2 and 5) that secure the right side instrument panel duct to the instrument panel support. Tighten the screws to 2.2 Nm (20 in. lbs.).
3. Install the push-pin fastener (4) that secures the demister duct (3) to the right side instrument panel duct.
4. Install the instrument panel cover Instrument Panel Cover - Installation.
5. Install the instrument panel Instrument Panel - Installation.