Decklid Spoiler - Installation

INSTALLATION





1. Position the spoiler (1) by aligning the studs through decklid holes.





2. Lift the decklid.
3. Loosely install the nuts (1) to the spoiler studs through the access holes in the decklid. Repeat for the opposite side.
4. Torque the nuts to 6 Nm (4.4 ft. lbs.). Repeat for the opposite side.






NOTE: The manual trunk release handle (2) must be routed through the deck lid insulator.

5. Position the decklid insulator.
6. Install the push-in retainers (3) securing the decklid insulator (1) to the decklid.





7. Install the decklid bumper (1). Repeat for the other side.