Center Floor Console

CENTER FLOOR CONSOLE

FULL SIZE CONSOLE





1. Position the Low Frequency (LF) antenna (3) to the underside of the center floor console (1).
2. Install and tighten the two screws (2) that secure the antenna to the console. Tighten the screws securely.
3. Reconnect the wire harness connector to the antenna connector receptacle (4).
4. Reinstall the console into the vehicle. Floor Console - Installation.
5. Reconnect the battery negative cable.

MINI CONSOLE - POLICE





1. Position the Low Frequency (LF) antenna (2) onto the mounting bracket (3).
2. Reinstall the two plastic push-in fasteners (1) that secure the LF antenna to the mounting bracket.





3. Position the LF antenna and mounting bracket unit (2) onto the two weld studs (5) on the top of the floor panel transmission tunnel. If equipped, the antenna mounting bracket is positioned on top of the front bracket of the extruded aluminum equipment rack (4).
4. Install and tighten the two nuts (3) that secure the LF antenna mounting bracket and, if equipped, the front bracket of the extruded aluminum equipment rack to the two weld studs on the top of the floor panel transmission tunnel. Tighten the nuts securely.
5. Reconnect the wire harness connector to the connector receptacle for the LF antenna.
6. Engage the wire harness retainer to the LF antenna mounting bracket.
7. Reinstall the cover (1) onto the front of the center floor mini console.
8. Reconnect the battery negative cable.