Fuel Tank Pressure Sensor - Removal

REMOVAL






NOTE: The Fuel Tank Pressure sensor is located under the rear of the vehicle, and is integrated in the vent tube coming from the fuel pump module.

1. Disconnect and isolate the negative battery cable.
2. Remove the fuel filler cap to relieve tank pressure.
3. Raise and support the vehicle Maintenance.
4. Disconnect the fuel tank pressure sensor electrical connector (1).





5. Carefully raise the retaining tab (2), rotate and remove the fuel tank pressure sensor (1) from the fuel tank vent tube.





6. The fuel tank pressure sensor seal (1) can be reused if not damaged.