Tail Lamp - Installation

UNIT

DOMESTIC





If replacing the tail lamp unit (5) with a new one, transfer the bulb sockets to the new unit (5).

1. Position the tail lamp unit (5) near the quarter panel (4),
2. Connect the three electrical connectors (1, 2, and 3).
3. Align the ball and socket retainers in the quarter panel (4) and firmly push forward until the tail lamp (5) snaps into place.





4. Install the push pin retainers (2) to the tail lamp unit (1).
5. Connect the battery negative cable.

EXPORT





If replacing the tail lamp unit (5) with a new one, transfer the bulb sockets to the new unit (5). Remember that there is a rear fog lamp bulb in the BUX tail lamp unit.

1. Install the tail lamp unit (5). Follow the same procedure as the domestic 1.