Front Lamp Unit - Removal

UNIT

DOMESTIC





1. Open hood.
2. Disconnect and isolate the battery negative cable.
3. Loosen the fascia on the side you're taking the front lamp unit out on Front Bumper Fascia - Removal. The fasteners along the radiator closure panel, the splash shield to fascia screws, and the bolt holding the fascia to the fender at the wheel well opening.
4. Remove the three screws (3) to the front lamp unit (4) to body.
5. Pull the front lamp unit (4) straight back to unsnap the ball and socket pivots from the retainer (1).





6. Maneuver the front lamp unit out of its mounting pocket, enough to expose the individual lamp (1) electrical connectors (2 and 3).
7. Disconnect the two electrical connectors (2 and 3).

EXPORT





1. Use the Domestic Removal procedure to remove the BUX front lamp unit. Refer to 1.
2. For BUX markets, there are three electrical connectors (2, 3, and 4) to disconnect.