Instrument Cluster - Installation

INSTALLATION

CLUSTER ASSEMBLY





1. If removed install the cluster bezel onto the cluster and install the retaining screws (1).
2. Position the cluster in the instrument panel opening.
3. Connect the electrical connectors.
4. Push instrument cluster and bezel assembly forward.





5. Install the retaining screws (1) that secure the instrument cluster bezel.
6. Install the instrument panel top panel cover Instrument Panel Pad - Installation.
7. Connect the battery negative cable.

MASK AND LENS ASSEMBLY





NOTE: The mask and lens are serviced together as a unit. If replacement is required for either of these components, they both will be replaced as a unit.

1. Position the mask and lens assembly on the cluster housing, install the screws (1) along the top and bottom back of the cluster.

2. Install the instrument cluster assembly into the vehicle. 1