Instrument Panel Demister Duct - Installation

INSTALLATION

NOTE: LHD model shown in illustrations. RHD model similar.

DRIVER SIDE DUCT ASSEMBLY

NOTE: The driver side demister duct is serviced only as an assembly with the driver side instrument panel duct.





1. Position the driver side duct assembly (3) to the instrument panel.
2. Install the two screws (1) that secure the driver side duct assembly to the instrument panel support. Tighten the screws to 2.2 Nm (20 in. lbs.).
3. Connect the driver side demister hose (2) to the driver side duct assembly.
4. Install the instrument base panel Instrument Panel - Installation.
5. Install the instrument panel covers Instrument Panel Pad - Installation.
6. Reconnect the negative battery cable.

PASSENGER SIDE DUCT





1. Position the passenger side demister duct (3) to the instrument panel.
2. Install the two screws (2) that secure the passenger side demister duct to the instrument panel support. Tighten the screws to 2.2 Nm (20 in. lbs.).
3. Connect the passenger side demister hose (1) to the passenger side demister duct.
4. Install the instrument base panel Instrument Panel - Installation.
5. Install the instrument panel covers Instrument Panel Pad - Installation.
6. Reconnect the negative battery cable.