Cooling Fan - Installation

COOLING FAN - INSTALLATION





1. Install the fan motor (5) onto shroud (3).
2. Install the fan (6) onto the motor.
3. Install the lower (8) shroud seal.





4. Install radiator fan module (1).
5. Connect the electrical connectors.
6. Install the wiring harness mounting retainers into fan shroud.
7. Install the upper radiator hose support bracket (2).
8. Install upper radiator hose to the radiator.





9. Install the upper radiator core support. Tighten outer bolts (1) to 23 Nm (17 ft. lbs.). Tighten the inner support bolts to 8 Nm (6 ft. lbs.).
10. Install the hood latch cable.
11. Install the core support seal (3).





12. Install radiator closure panel (2) Upper Closure Panel - Installation.
13. Connect the negative battery cable.
14. Fill the coolant to the proper level.
15. Run vehicle. Check for proper fan operation and coolant level.
16. Install the air intake duct.