Remote Radio Switches - Removal

REMOVAL

WARNING: On vehicles equipped with airbags, refer to electrical, restraints before attempting any steering wheel, steering column, or instrument panel component diagnosis or service. Failure to take the proper precautions could result in accidental airbag deployment and possible personal injury.

1. Disconnect and isolate the battery negative cable.
2. Remove the driver side airbag Driver Air Bag - Removal.
3. Remove the steering wheel Removal.
4. Unplug the wire harness connector from the remote radio switch.
5. Remove steering wheel rear cover.
6. Remove the remote radio switch from the steering wheel by depressing tabs on each side of each switch.

NOTE: The right remote radio switch back is white in color. The left switch back is black in color. The right/left remote radio switch orientation is with the steering wheel installed, and driver in driver's seat.