Pressure Hose

GAS TURBO ENGINE

NOTE: Before proceeding, Service Precautions .

1. Siphon as much fluid as possible from the power steering fluid reservoir.
2. Raise and support the vehicle. Service and Repair




3. Remove the fastener (1) securing the power steering hose routing clamps to the left side of the crossmember.





4. Remove the pressure hose (1) at the steering gear (2).

5. lower the vehicle.
6. Remove the engine appearance cover.
7. Remove the air cleaner housing.Air Cleaner Body - Removal




8. Remove the pressure Hose (3) at the pump (2) pressure port.





9. Remove the pressure hose routing clamp bolt (2) at the left side of the engine.
10. Remove the power steering pressure hose from the engine compartment. Remember how the hose routes through the engine compartment for ease of installation.