Oil Pressure Switch - Removal

REMOVAL





1. Disconnect and isolate the negative battery cable.
2. Raise and support the vehicle Service and Repair
3. Remove the splash shield from the right side frame rail Splash Shield - Removal
4. If vehicle is equipped with an A/C compressor, remove the accessory drive belt Serpentine Accessory Drive Belt - Removal
5. Remove the three bolts (2) and reposition the A/C compressor (1), if equipped.





6. Disconnect the oil pressure switch electrical connector.
7. Remove the oil pressure switch using oil pressure socket C-4597 (1) or equivalent.