Passenger Airbag - Installation

INSTALLATION





1. Position PAB into instrument panel opening.
2. Connect the two PAB squib connectors (1).
3. Install air bag unit into the instrument panel opening.
4. Install the two retaining nuts (2) retaining PAB to instrument panel assembly inside glove box opening. Tighten to 9.5 Nm (84 in. lbs.).
5. Install instrument panel top cover Instrument Panel Cover - Installation.




6. Connect wiring harness routing clip to the lower "A" pillar.
7. Install the right and left A-pillar trim panels A-Pillar Trim Panel-Installation.
8. Install the glove box Instrument Panel Glove Box - Installation.

WARNING: Do not connect the battery negative cable, serious or fatal injury may result if the system test is not performed first.