Installation

INSTALLATION





1. Slide the airbag trim cover over the hook and latch retainers on the knee blocker airbag (1).
2. Push the airbag forward.
3. Reach up behind the instrument panel and install the two knee blocker airbag retaining nuts. Tighten nuts to 10.5 Nm (93 in. lbs.).
4. Install the two knee blocker airbag cover screws (4).

WARNING: DO NOT CONNECT THE BATTERY NEGATIVE CABLE. PERSONAL INJURY OR DEATH MAY RESULT IF THE SYSTEM TEST IS NOT PERFORMED FIRST. FOR THE SYSTEM TEST, Supplemental Restraints Verification Test