Installation

INSTALLATION

NOTE: A battery reconnect procedure must be performed anytime the battery has been disconnected.

1. Connect the wire harness connector to the cigar lighter or power outlet receptacle base connector receptacle.

2. Install the cigar lighter or power outlet mount into position.

3. Align the splines on the outside of the cigar lighter or power outlet receptacle base connector receptacle with the grooves on the inside of the mount.

4. Press firmly on the cigar lighter or power outlet receptacle base until the retaining bosses of the mount are fully engaged in their receptacles.

5. Install the cigar lighter knob and element into the cigar lighter receptacle base, or the protective cap into the power outlet receptacle base.

6. Connect the battery negative cable.