B1661

B1661-FRONT FOG LAMP CONTROL CIRCUIT OPEN





For a complete wiring diagram Refer to Diagrams/Electrical.

- When Monitored:
- With the Fog Lamps activated.
- Set Condition:
- When the IPM detects an OPEN condition.





Diagnostic Test

1.INTEGRATED POWER MODULE

NOTE: Prior to testing, check and inspect that all applicable fuses are functional and working properly.

Turn the ignition off.

Replace the Fog Lamp relay with and known good relay.

With the Scan Tool, clear all IPM DTC's.

Turn the Fog Lamps ON then OFF.

With the Scan Tool, read the DTC's.

Does the Scan Tool read: B1661-FRONT FOG LAMP CONTROL CIRCUIT OPEN?

Yes

- Replace the Integrated Power Module.
- Perform the BODY VERIFICATION TEST - VER 1. Body Verification Test

No

- Test complete.
- Perform the BODY VERIFICATION TEST - VER 1. Body Verification Test