Removal

CHARGE AIR COOLER HOSES-REMOVAL

HOSE - CHARGE AIR COOLER TO THROTTLE BODY





1. Remove air cleaner housing.
2. Disconnect negative battery cable.
3. Disconnect positive battery cable.
4. Remove battery and battery tray.
5. Remove battery tray support bracket.
6. Loosen hose clamp at charge air cooler (2).
7. Dislodge hose from charge air cooler.




8. Disconnect Inlet Air Temperature (IAT) sensor (2) connector.
9. Disconnect Throttle Inlet Pressure (TIP) hose from charge air cooler hose (1).
10. Loosen hose clamp at throttle body.
11. Remove charge air cooler hose.

HOSE - TURBOCHARGER TO CHARGE AIR COOLER





1. Raise vehicle on hoist.
2. Loosen hose clamp at charge air cooler (1).
3. Dislodge hose from charge air cooler.
4. Loosen hose clamp at turbocharger.
5. Dislodge hose from turbocharger.
6. Remove nuts (3) securing charge air cooler hose to structural collar.
7. Remove charge air cooler hose.