CVT Automatic Transaxle

U0001-CAN C BUS

For a complete wiring diagram Refer to Diagrams/Electrical. Electrical Diagrams


Theory of Operation


The Controller Area Network (CAN) is a high speed serial communication line for multiplex communication between multiple controllers that reside on the network. The Transmission Control Module monitors the transmit and receive message from the CAN BUS.


- When Monitored:

Ignition on in the run position with a system voltage between 9.0 and 16.0 volts.

- Set Condition:

If the Transmit or receive error counter is equal to or greater than 256.


For CAN Bus diagnostic procedures refer to Communications.