Removal

REMOVAL - FLUID COOLER

NOTE: Before proceeding with this procedure, Refer to Service Precautions.

1. Siphon as much fluid as possible from the power steering fluid reservoir.
2. Raise the vehicle.
3. Remove the hose clamp attaching the power steering fluid return hose to the power steering fluid cooler. Remove the return hose from the cooler.








4. Remove the hose clamp attaching the power steering cooler fluid hose to the steel fitting in the power steering gear outlet port (Fig. 14) (Fig. 15).
5. Remove the two screws securing the cooler to the front suspension crossmember (Fig. 14) (Fig. 15).
6. On LHD vehicles, open the tube routing clamp on the right front of the power steering gear housing and remove the cooler tube from it.
7. Remove the cooler from the vehicle.