Fuse Block

REMOVAL

WARNING: ON VEHICLES EQUIPPED WITH AIRBAGS, REFER TO ELECTRICAL, RESTRAINT SYSTEMS BEFORE ATTEMPTING ANY STEERING WHEEL, STEERING COLUMN, OR INSTRUMENT PANEL COMPONENT DIAGNOSIS OR SERVICE. FAILURE TO TAKE THE PROPER PRECAUTIONS COULD RESULT IN ACCIDENTAL AIRBAG DEPLOYMENT AND POSSIBLE PERSONAL INJURY.

The Fuse Block is serviced with the instrument panel wire harness. If service is required to the fuse block, the entire instrument panel harness must be replaced.

1. Remove the instrument panel.
2. With the instrument panel removed, disassemble the instrument panel enough to gain access to all screws and connectors.
3. Remove instrument panel wire harness with fuse block.

INSTALLATION
1. Install the instrument panel wire harness to the instrument panel.
2. Install all items removed from the instrument panel to gain access to the wire harness.
3. Install the instrument panel.