Audio System

The audio system on the 2005 PL consists of a radio that communicates over the PCI bus. The speakers are located in the instrument panel, the front doors and the rear "D" pillars. The instrument panel speakers are a tweeter type speaker for high frequency. The front door speakers are a woofer/midrange type speaker. The rear "D" pillar speakers are a full range type speaker. If one of the speaker circuits experiences a short, the other speakers on that output channel will also shut down until the circuit is repaired. The radio will also set a trouble code, which the DRBIII(R) can display.

The in-dash CD-changer is designed to fit into the existing cubby bin in the center stack. This new cartridge-less CD-changer is controlled by your radio, and allows you to individually load up to four discs at one time. However, due to its compact design, the CD-changer can only carry out one operation at a time. For example you can not load a new disc while playing another at the same time. Each operation happens sequentially.

The radio unit installed with your system provides control over all features of the CD-changer with the exception of the CD load and eject functions, which are controlled by buttons located on the front of the CD-changer. The radio also supplies the power, ground, PCI Bus, left and right speaker output through a single DIN cable. All features you would expect , such as Disc Up/Down, Track Up/Down, Random and Scan are controlled by the radio, which also displays all relevant CD-changer information on the radio display.

The CD-changer contains a Load/Eject button and an indicator light for each of the four disc positions. The individual light indicates whether a CD is currently loaded in that particular chamber of the CD-changer. Pressing the individual Load/Eject button for a particular chamber will eject a disc currently present in the chamber. If the chamber is currently empty, actuating the Load/Eject button will position that chamber to receive and load a new disc in that chamber.