Air Temperature Sensor ( Ambient / Intake ): Service and Repair

REMOVAL
1. Disconnect the negative battery cable.
2. Disconnect the inlet air temperature sensor
3. Remove the air cleaner lid.
4. Disconnect the inlet air tube from the throttle body.
5. Remove inlet air tube from air cleaner lid.

INSTALLATION
1. Install inlet air tube to air cleaner lid and tighten clamp.
2. Install inlet air tube to throttle body and tighten clamp.
3. Install air cleaner lid to air cleaner box.
4. Connect the inlet air temperature sensor electrical connector.
5. Connect the negative battery cable.