Marker Lamp: Service and Repair

MARKER LAMP UNIT

REMOVAL
1. Disconnect and isolate the battery negative cable.

Ignition Coil:

Electronic Ignition Coil Connector:

2. Reach behind front bumper fascia forward of front wheel and remove attaching clip from the front side marker lamp.
3. Remove lamp from front fascia.
4. Remove bulb from socket.

INSTALLATION
1. Install bulb into socket.
2. Install bulb socket into lamp unit
3. Install lamp unit into front fascia .
4. Install attaching clip to the front side market lamp unit.
5. Connect the battery negative cable.