Brake Actuating System Specifications

BRAKE ACTUATION SYSTEM Part 1 Of 2:

BRAKE ACTUATION SYSTEM Part 2 Of 2:

BRAKE ACTUATION SYSTEM
ACTUATION:
Vacuum Operated Power Brakes Standard
Hydraulic System Dual-Diagonally Split
BRAKE PEDAL:
Pedal Ratio 3.41
POWER BRAKE BOOSTER:
Make/Type Bosch/Vacuum
Mounting Studs M8 x 1.25
Diaphragm Size/Type 205 mm Tandem
MASTER CYLINDER ASSEMBLY:
Type Dual Tandem
ACTUATION:
Body Material Anodized Aluminum
Reservoir Material Polypropylene
MASTER CYLINDER BORE STROKE AND SPLIT:
Non ABS 22.23 mm x 34.0 mm (0.875 inch x 1.34 inch)
ABS 23.82 mm x 34.0 mm (0.937 inch x 1.34 inch)
Displacement Split 50/50
MASTER CYLINDER FLUID OUTLET PORTS:
Tube Fitting Type SAE 45° Inverted Flare
W/ABS - Primary Tube Nut Thread 7/16 inch-24
W/ABS - Secondary Tube Nut Thread 3/8 inch-24
W/O ABS - All Tube Nut Threads 7/16 inch-24
ABS HYDRAULIC CONTROL UNIT:
Hydraulic Tube Fitting Type SAE 45° Inverted Flare
Inlet Port Threads 7/16 inch-24
Outlet Port Threads - Left Front and Left Rear 7/16 inch-24
Outlet Port Threads - Right Front and Right Rear 3/8 inch-24
PROPORTIONING VALVES: (non-ABS vehicles)
Material Aluminum
Function Fixed Pressure Proportioning