Power Foldaway Mirror switch

The following test is designed to be used only on vehicles equipped with power fold-away side view mirrors.

Power Fold-Away Mirror Switch:

1. Remove power mirror switch from mounting position.
2. Using an ohmmeter, test for continuity between the terminals of the switch as shown in the tables below.




NOTE: When testing using the chart below be certain to read the chart correctly. Example - When testing left mirror "DOWN", pins 1, 9, 10 will show continuity to each other, and pins 3, 4, 5 will show continuity to each other.

3. If test results are not obtained as shown in the tables below, replace the switch.