Trunk / Liftgate Solenoid: Testing and Inspection

1. Confirm operation of RKE transmitter(s) by actuating LOCK and UNLOCK functions.
2. Confirm lead is connected to the deck lid release solenoid.
3. Unplug lead, and use an ohmmeter to verify continuity of connection between pin 2 of the harness connector and ground. Refer to Wiring Diagrams for Connector Pin-Outs.
4. Connect test light to pin 1 of the harness connector and actuate deck lid release button on transmitter. Refer to Wiring Diagrams for Connector Pin-Outs.
5. If test light comes on, the wiring circuit between the RKE module and the solenoid is functional, and the deck lid solenoid should be replaced.
6. If test light does not come on, refer to the proper Body Diagnostic Procedures manual for further troubleshooting information.