Leak Detection Pump: Service and Repair

ASSEMBLY-NATURAL VAC LEAK DETECTION

REMOVAL




1. Disconnect negative battery cable.
2. Raise and support vehicle.
3. Remove the right rear tire.
4. Remove the inner splash shield.
5. Natural Vacuum Leak Detection Pump (NVLD) location.




6. Remove vapor canister and NVLD pump assembly from vehicle.




7. Squeeze tab and pull pump from bracket.




8. Remove hoses from pump assembly and remove pump.

INSTALLATION




1. Install pump assembly to hoses.




2. Install pump assembly to bracket.




3. Install vapor canister and pump assembly to vehicle.




4. Install inner splash shield.
5. Install right rear tire.
6. Lower vehicle.
7. Connect negative battery cable.