Front Fender Liner: Service and Repair

SHIELD-WHEELHOUSE - FRONT

REMOVAL




1. Raise and support the vehicle.
2. Remove the wheels from the side of the vehicle being serviced.
3. Remove the body side cladding from the side of the vehicle being serviced.
4. Remove the push-pins (1) that secure the lower front wheelhouse shield (3) to the front wheelhouse shield (3) and the body.
5. Remove lower front wheelhouse shield from the vehicle.




6. Remove the front belly pan.
7. Remove the push-pins (2) that secure the front wheelhouse shield (1) to the body.
8. Remove the front wheelhouse shield from the vehicle.

INSTALLATION




1. Position the front wheelhouse shield (1) into the front fenderwell.
2. Install the push-pin (2) that secure the front wheelhouse shield to the body.
3. Install the front belly pan.




4. Position the lower front wheelhouse shield (3) onto the body.
5. Install the push-pins (1) that secure the lower front wheelhouse shield to the front wheelhouse shield (2) and the body.
6. Install the body side cladding.
7. Install the front wheels.
8. Lower the vehicle.