Removal

REMOVAL - FLUID COOLER

NOTE: Before proceeding with this procedure, Refer to Service Precautions.

1. Siphon as much fluid as possible from power steering fluid reservoir.
2. Raise vehicle.





3. Remove hose clamp securing return hose to power steering cooler tube (Fig. 21). Slide hose off end of tube. Cap off hose end and cooler tube.
4. Remove hose clamp securing cooler hose to power steering gear return outlet tube/fitting (Fig. 21). Slide hose off end of tube. Cap off hose end and outlet tube.
5. Remove fasteners securing cooler to crossmember.
6. Remove cooler from vehicle.