Air Cleaner Housing: Service and Repair

AIR CLEANER HOUSING

REMOVAL
1. Unlatch 2 clips and rotate the lid upward and off of the air cleaner box.





2. Pull air filter up and out of air cleaner box (Fig. 12).
3. Remove the 4 bolts from the air cleaner box to throttle body.
4. Remove the make-up air hose from the air cleaner box.
5. Remove the bolt and nut from the air cleaner box.
6. Remove wiring harness from the clips on the side of the air cleaner box.
7. Remove the wiring clip from the front of the air cleaner box.
8. Disconnect the vacuum harness from the throttle body and body harness.
9. Pull air cleaner box up and off of stud and battery tray and remove from vehicle.

INSTALLATION
1. Install air cleaner box. Make sure that it is on the battery tray tab in the back and on the stud on the side.
2. Install the bolts to the throttle body and tighten.
3. Connect the make-up air hose to the air cleaner box.
4. Connect the vacuum harness to the throttle body and body harness.
5. Install the wiring clip in the front of the air cleaner box.
6. Install the wiring harness into the clips on the side of the air cleaner box.
7. Install the nut and bolt for air cleaner box and tighten to 7.3 Nm (65 inch lbs.).
8. Install inlet elbow to air cleaner box and fender.





9. Install air filter element on to throttle body and push towards the throttle body and past lip in air cleaner box bottom (Fig. 13).
10. Install lid and latch the 2 clips.