Power Door Locks

CENTRAL LOCKING (W/VTSS ONLY)
This feature allows the customer to lock/unlock all vehicle doors with the key from the front door cylinder lock switch. The customer can choose to program this feature to unlock all doors with one turn of the key or open the driver door only with the first turn of the key and open the other doors with the second turn. Altering the operation of the unlock function via the key cylinder switch from one turn to two turns will also alter the operation of the RKE transmitter from one press to two presses.

ROLLING (AUTOMATIC) DOOR LOCKS
All vehicle doors are locked automatically once the vehicle reaches a speed of 15 mph and all doors are closed. This feature can be also be enabled/disabled by the customer.

DOOR LOCK INHIBIT
This feature disables the door lock command from the interior door lock switch whenever the driver door is open and the key is in the ignition. This prevents the driver from locking the keys in the ignition when using the power door locks. This feature is inoperable if the IOD fuse is not installed.

POWER DECKLID RELEASE
Electrically releases the decklid upon two presses of the RKE transmitter decklid release button. This feature is disabled once the speed of the vehicle is greater than 5 mph. The decklid can also be released from the switch in the glove box.

PANIC MODE (IF EQUIPPED)
Upon activation of the panic function, the headlamps and park lamps flash in an alternating manner, the horn pulses every second and the courtesy lamps are turned on. The panic mode allows normal nighttime driving by allowing the headlamps and park lamps to be on steady when the headlamp switch is in the on position. Panic mode is activated immediately by pressing the panic button once. It does not disarm the VTSS or unlock the doors. It is canceled by pressing the button a second time, reaching a vehicle speed greater than 15 mph or after 3 minutes has elapsed in panic mode. Once panic mode has been activated there is a 2-second delay before it will turn off. Once it is cancelled there is a 2-second delay before it can be reactivated. This is to avoid the problem of deactivating and immediate reactivating due to multiple button presses.