Accessories and Optional Equipment: Description and Operation
AUDIO/VIDEOThe audio system includes the following components:
- Antenna
- Compact disc changer (if equipped)
- Radio noise suppression components
- Radio receiver
- Speakers
Certain functions and features of the audio system rely upon resources shared with other electronic modules in the vehicle over the Programmable Communication Interface (PCI) bus network. The data bus network allows the sharing of sensor information. For diagnosis of these electronic modules or of the data bus network, the use of a DRB III(R) scan tool and the proper Diagnostic Procedures manual are recommended.
The audio system components are designed to provide audio entertainment and information through the reception, tuning and amplification of locally broadcast radio signals in both the Amplitude Modulating (AM) and Frequency Modulating (FM) commercial frequency ranges.
The audio system components operate on battery current received through a fuse in the Power Distribution Center (PDC) on a fused ignition switch output (run-acc) circuit so that the system will only operate when the ignition switch is in the Run or Accessory positions.