Turn Signal Lamp: Service and Repair

REMOVAL
1. Working in the appropriate front wheel well, remove the rear-most fasteners from the front wheel-house liner. Refer to Body for detailed instructions.
2. Reach up behind the side repeater lamp and depress the two lamp housing retaining tabs. Remove the lamp housing from the fender opening.
3. Rotate the side repeater lamp housing counterclockwise and remove the lamp socket from the lamp housing.

INSTALLATION
1. Install the side repeater lamp socket into the lamp housing.
2. Verify lamp operation.
3. Install the side repeater lamp in the front fender. Be certain lamp is secure in fender.
4. Install the front wheelhouse liner. Refer to Body for detailed instructions.