Tail Lamp Unit Replacement

REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Move trunk lining as necessary from rear closure panel to gain access to back of tail lamp.
3. Remove nuts attaching tail lamp to the rear closure panel.
4. Disconnect the wiring connectors and bulbs from unit by twisting bulb counterclockwise.
5. Remove lamp housing from vehicle.

INSTALLATION
1. Place lamp housing into position.
2. Install the bulbs into bulb pockets and rotate clockwise.
3. Install nuts attaching tail lamp to the rear closure panel.
4. Reposition trunk lining to rear closure panel.
5. Connect the battery negative cable.
6. Verify vehicle and system operation.